Send Your Enquiry
  Useful Links: FAQs Sitemap  
 
A Enterprise

Articles

Turbine Preservation

October 3, 2011

 

Turbines are mainly used in sugar units,power and fertilizer plants,these units undergo planned shutdown every year for the purpose of maintenance. Turbines used to rust and corrode during this period as they remain idle and are kept in stores. 

Moisture accelerates the rate of corrosion leading to    

  • Deterioration & decrease in life of parts and components.
  • Malfunctioning of equipments

General Recommendation

During storage,shutdown or maintenance Relative Humidity should be maintained at 15%-30% RH at 24ºC(75ºF) and during operation at less than 35% RH at ambient temperature to minimise the loss due to corrosion.

TDS Solution

TDS provides preservation services by protecting the turbines from rust and corrosion through dehumidification There are two types of turbines one Condensing type and other Extraction type. Preservation of turbine is done for both types with the help of desiccant based dehumidifier.

Dehumidifier is installed near the turbine and from the process  inlet of the dehumidifier,ambient air is taken and from the process outlet of the dehumidifier,dry moisture free air is supplied into the turbine. This connection is done on relief valve/drain pipe /cross overhead pipe in the turbine or other available outlet. Dry-air ensures that the turbine is under optimum preservation by controlling moisture and humidity during idle stage or during shutdown of  plant. 

TDS provides desiccant based dehumidifiers to maintain the desired level of humidity.

The moist air adsorbed from the ambient requires regeneration which is done by dehumidifier itself through inbuilt desiccant bed in the dehumidifier. It is accomplished by self heating arrangement with the help of heaters, installed in reactivation side of dehumidifier.

The process outlet of dehumidifier is connected at a convenient location like at the release valve or at any suitable opening. In case of condensing type turbine the outlet is given through the condenser. Thus, the turbine is preserved under low moisture conditions free from dust. The best method to check humidity is by measuring the outlet air humidity of turbine that will signify the optimum conditions maintained within the turbine. Along with dehumidifiers TDS provides condensing unit,blower,ducts and skilled manpower for services on RENT.

 
Back
 
 
 
Downloads
 
 
Print Email
Other Group
Companies:
Delair Fresh air HVAC Systems Delair Dehumidification Delair Compressed Air Drying Delair IT Portals
  Dehumidification
& Drying
  Fresh air HVAC Systems   Compressed Air Drying   Compressed Air Drying   IT Portals