Furnace is a device used for heating,it have both household and industrial application. To carryout maintenance activities in furnace it needs to cool down. Since the temperature is high inside workers cannot carry out the maintenance activities and the process gets delayed.
In petrochemical and sugar units,fertilizer and power plants annual shutdown takes place for the purpose of carrying out maintenance activities. Temperature control services becomes essential at this stage because if the equipments like furnace, columns, tanks, boilers and reactors etc are allowed to cool on their own it takes very long and precious man hour gets wasted.
Temperature control services through condensing units, dehumidifiers, plenums and ducts is the most recommended method. Dehumidifiers and condensing unit combination can provide the level of temperature and humidity as per requirement.
Technical Drying Services(TDS) provides temperature control services with the help of desiccant based dehumidifiers & condensing units. Fresh dehumidified, clean air at desired RH and temperature is provided by extracting the impure air from the inside environment. The desiccant based dehumidifier removes moisture from the air by chemical attraction rather than condensation. Impure air is directed across a desiccant material that acts as a drying agent.
The moisture & other impurities are collected in the desiccant. The moist desiccant is dried using second hot air stream that heats the desiccant and releases the moisture. Then the desiccant is reused to provide more dry-air. In a continuous process the air is dried by the desiccant & at the same time the moist desiccant is dried for reuse so that dry air is available at all times continuously.
The main USP of TDS dehumidification services is that it provides highly qualified technical manpower along with all the required equipments. As the service is provided on rental basis it can be availed whenever required.